UK/Mids on PTBM134

A forum for the discussion of matters of a technical nature. All such activities are undertaken at the readers discretion and own risk. If you don't know what you are doing, don't blame us if it all goes wrong!
Post Reply
UK-Ham86
Regular
Regular
Posts: 17
Joined: 22 Jul 2021, 10:54
Has thanked: 1 time
Been thanked: 5 times

UK/Mids on PTBM134

Post by UK-Ham86 »

Had a couple of hours spare last night and a rusty Beta 3000.

Very simple installation:

Remove the LC7137, solder a 10 pin header to one side of the empty chip pinout and 1 wire to the hole PLL Pin 9 was connected, no other mods or track cuts needed.

Plug in board and use CH9 switch for Mids/UK.

Sofware calibrated, no trimmer switching to get it on frequency.

Total cost: £5

Beta3000-3.jpg
Beta3000-2.jpg
Beta3000-1.jpg
You do not have the required permissions to view the files attached to this post.
Top
User avatar
lambrettadave
Veteran
Veteran
Posts: 3395
Joined: 11 Apr 2011, 15:50
Call Sign: TM455
Location: sunderland
Has thanked: 36 times
Been thanked: 50 times
Contact:
Contact lambrettadave

Re: UK/Mids on PTBM134

Post by lambrettadave »

Keep up the good work
CALL SIGN 26TM455 OPERATOR DAVE QTH SUNDERLAND

http://www.flickr.com/photos/88011785@N06/ for CB magazine.reviews

http://www.youtube.com/user/lambrettadave7 for some vids of my radios.
Top
Post Reply

Return to “CB & 11m Multi-Mode Modification & Repair”