Motorola Codeplug wanted

The place to discuss Commercial & Private licensed hand held & mobile transceivers, as well as imported hand held and mobile transceivers.
siegfried
New User
New User
Posts: 4
Joined: 06 May 2022, 15:07

Re: Motorola Codeplug wanted

Post by siegfried »

Mototrbo2020 wrote: 08 May 2022, 11:07
In that case you will need to download a blank one that goes with your Firmware version and then recover it.
Yes, has anyone that file?

Am I the only one that the radio does not allow to save more than 2 channels?

Thx

Siegfried
Mototrbo2020
Super Member
Super Member
Posts: 113
Joined: 21 Jun 2020, 13:36
Has thanked: 23 times
Been thanked: 1 time

Re: Motorola Codeplug wanted

Post by Mototrbo2020 »

siegfried wrote: 08 May 2022, 11:39
Mototrbo2020 wrote: 08 May 2022, 11:07
In that case you will need to download a blank one that goes with your Firmware version and then recover it.
Yes, has anyone that file?

Am I the only one that the radio does not allow to save more than 2 channels?

Thx

Siegfried
Should be able to download it from the Motorola portal. Do you mean only 2 zones? You should have 16chs per zone and 2 zones.
perry1978
Registered New User
Registered New User
Posts: 1
Joined: 23 Mar 2023, 15:21

Re: Motorola Codeplug wanted

Post by perry1978 »

hi i am new here but needs some help i just got off ebay a motorola dp4600e and a dp4401e was told no passwords was on them but when pluged in to software showing thay have passwords on dose any one have any code plugs so i can get to use the radios for work thanks
Mototrbo2020
Super Member
Super Member
Posts: 113
Joined: 21 Jun 2020, 13:36
Has thanked: 23 times
Been thanked: 1 time

Re: Motorola Codeplug wanted

Post by Mototrbo2020 »

perry1978 wrote: 23 Mar 2023, 15:29 hi i am new here but needs some help i just got off ebay a motorola dp4600e and a dp4401e was told no passwords was on them but when pluged in to software showing thay have passwords on dose any one have any code plugs so i can get to use the radios for work thanks
Just recover them in cps.
sorel21ro
Registered New User
Registered New User
Posts: 1
Joined: 27 Sep 2023, 15:12

Re: Motorola Codeplug wanted

Post by sorel21ro »

hello can i have a codeplug for a dp4400e model MDH56RDC9VA1AN without a password thanks
smelyanin
Registered New User
Registered New User
Posts: 2
Joined: 18 Feb 2024, 18:10

Re: Motorola Codeplug wanted

Post by smelyanin »

Hi,
please help me find the code pluging for a Motorola dp4600e H56RDQ9VA1AN.
I spent all day but still couldn't find it. I bought dp4600e on the website with a password.
When I click recover in the CPS, I am asked to enter Key Alias and Key Value.

Thanks, Dmytro.
Last edited by smelyanin on 18 Feb 2024, 18:43, edited 2 times in total.
Mototrbo2020
Super Member
Super Member
Posts: 113
Joined: 21 Jun 2020, 13:36
Has thanked: 23 times
Been thanked: 1 time

Re: Motorola Codeplug wanted

Post by Mototrbo2020 »

smelyanin wrote: 18 Feb 2024, 18:14 Hi,
please help me find the code pluging for a Motorola dp4600e H56RDQ9VA1AN.
I spent all day but still couldn't find it. I bought dp4600e on the website with a password.
When I click recover in the CPS, I am asked to enter Key Alias and Key Value.

Thanks, Dmytro.
Sounds like it has TLS-PSK, your not going to get around that with basic skills unfortunately.
smelyanin
Registered New User
Registered New User
Posts: 2
Joined: 18 Feb 2024, 18:10

Re: Motorola Codeplug wanted

Post by smelyanin »

Thank you, I called the Motorola service center, but without documents for the radio station, I will not be able to remove the key. Therefore, I have gained experience now :) Sorry, I still have 1 more question, can I remove the 4-digit password when turning on the radio without TLS-PSK? Perhaps I could use this radio to test batteries. :roll:
Mototrbo2020
Super Member
Super Member
Posts: 113
Joined: 21 Jun 2020, 13:36
Has thanked: 23 times
Been thanked: 1 time

Re: Motorola Codeplug wanted

Post by Mototrbo2020 »

smelyanin wrote: 19 Feb 2024, 11:55 Thank you, I called the Motorola service center, but without documents for the radio station, I will not be able to remove the key. Therefore, I have gained experience now :) Sorry, I still have 1 more question, can I remove the 4-digit password when turning on the radio without TLS-PSK? Perhaps I could use this radio to test batteries. :roll:
No I don't believe it will let you do anything.
sabordab
Registered New User
Registered New User
Posts: 1
Joined: 20 Feb 2024, 23:10

Re: Motorola Codeplug wanted

Post by sabordab »

you can purchase one online
pawel40pawel40
Registered New User
Registered New User
Posts: 1
Joined: 11 Mar 2024, 10:26

Re: Motorola Codeplug wanted

Post by pawel40pawel40 »

Witam,

Bardzo proszę o pomoc w poszukiwaniu czystego codeplug do Motoroli DP w wersji UHF - DP 2400e, DP2600, DP2600e.
Bardzo proszę o pomoc.



Hello,

I am asking for help in finding a clean codeplug for Motorola DP in the UHF version - DP 2400e, DP2600, DP2600e.
Please help.
Last edited by Buick Mackane on 11 Mar 2024, 10:33, edited 1 time in total.
Reason: Translation
A10shon
Registered New User
Registered New User
Posts: 1
Joined: 02 Jul 2024, 11:01

Re: Motorola Codeplug wanted

Post by A10shon »

Hi, im in the same situation as most, I have 10x 4401 vhf radios and need a blank/usable codeplug as the sample in all versions of CPS I have dosent have the VHF version. Im well versed in programming Mototrbo equipment just dont have a NZ/Aus codeplug.

Basically I bought these radios as part of business liquidation and the original programer ( unkown ) has set them up via RM so there is no way with out installing a blank / different Codeplug across all these radios I can access anything let alone read them them on any version of CPS ( I have most versions and generations ), as you would assume all the dealers in NZ have been as helpful as you expect and basically think im robbing a bank. All my other units are DP2400e's and these radios were going to be the upgrade.

Any assistance would be appreciated.

P/s before you ask I dont need any of the data off these radios and am happy to wipe them.

Happy pay for a working codeplug
G7VNQ
Regular
Regular
Posts: 6
Joined: 14 Mar 2025, 14:32
Call Sign: G7VNQ

Re: Motorola Codeplug wanted

Post by G7VNQ »

I'm also looking for a blank to start my DP4400e, or one that I can write over.
UK Amateur use.

Thanks.
Kev S
Davebr30
Registered New User
Registered New User
Posts: 2
Joined: 16 Apr 2026, 23:28

Re: Motorola Codeplug wanted

Post by Davebr30 »

Hi there try 2.0 cps and not working with motorola dp4400
Keep say
Codeplug version not supported. Please refer to the readme file of the application for supported codeplug versions
Post Reply